Unleash the power of your Spyder with this Firestorm Trigger System. Firestorm trigger system is compatible with all Spyder paintball guns. It is very easy to install and it takes only a few minutes. It has three different firing modes: semi, three-round burst and full auto.
The Firestorm trigger has a one-push key for adjustment and two dual-color LED's for indicators. The LED nearest the push key stands for "mode", and the other stands for ROF. There is also a red LED for low battery indicator.
For "mode" indicator, green = semi-auto, orange = three-round burst, and red = full-auto.
For the ROF indicator, green = low rate, and red = high rate. For burst and full-auto modes, the ROF can be toggled between high and low. For semi-auto mode, the ROF will be fixed on high for a reactive trigger response of up to 13 BPS.
When the power is turned on, the default mode is semi-auto. All settings can be adjusted while the power stays on. Any adjustments will be reset when the power is turned off.
The low battery indicator stays off during normal operations. It will turn on when the amount of charge drops to about 1/3rd of the full battery capacity.
The Firestorm trigger is also equipped with a lock function. A short-circuit plug on the internals serves this function. When this plug has been pulled off, the mode will be locked to semi-auto and cannot be adjusted.
Operation:
Push and hold the button for two seconds, then release. Quickly push the button to change ROF. To activate your desired ROF, push and hold the button down for two seconds.
Note: During the interval of ROF adjustment, the safety will be turned on automatically. At the end of the ROF adjustment, the safety will be turned off and the trigger will function normally.
|
